Winter on the Sleeping Bear Heritage Trail is special. Light fluffy snow covering the trees and trail make it ideal for photography, skiing, or snowshoeing through a secluded winter wonderland! Most of the trail is groomed in the winter with a corduroy base for skate skiing, snowshoeing, and classic tracks on the outside for classic cross-country skiing.
The SBHT is groomed by the Friends of Sleeping Bear Dunes. The cost of grooming is paid through donations from people like you! Please click here to support the trail.
If you want to be on the SBHT Winter Ski Condition e-mail Report, click here to request being added to the list.
CLICK HERE for a printable Ski Map. CLICK HERE to download the SBHT Ski Brochure.
Trail Parking
Trailhead parking is available on Forest Haven Road in Glen Arbor, Glen Haven, the Dune Climb, Pierce Stocking Drive, and the corner of Voice Rd and Bar Lake Rd on the north end of Empire. The section of trail north of Glen Arbor has trailhead parking at Crystal View Trailhead, the Bay View Trailhead on Thoreson Road, and on Port Oneida Road.
Trail Description
The trail from Glen Arbor to the Dune Climb (4 miles) is relatively flat with beautiful scenery. A loop trail through DH Day Campground and a loop just south of the Dune Climb have been added this year. You will have to remove your skis to cross M-109 and in Glen Haven.
The section from Empire to Pierce Stocking Scenic Drive (3 miles) is also beautiful, but has more challenging slopes. This section will be groomed without classic tracks because of the hills. It will be about 10 feet wide corduroy.
The trail north of Glen Arbor – from Crystal View trailhead to Port Oneida Road is open for skiing. This section will be groomed in 2016-2017. There is also trailhead parking on Thoreson Road at the Bay View trail parking lot.
The newest section of trail from Port Oneida Road to Bohemian Road (CR-669) is open for skiing but is not groomed. Some areas of this section are so close to the highway that snowplows throw sand and salt on the trail.
Etiquette for Fat-Tire Bikes on the SBHT
Please do not ride on the SBHT if conditions are too soft. If you are leaving a rut deeper than an inch, having a hard time riding in a straight line, or pushing your bike, the snow is too soft and you should not ride your bike on the trail.
Tires must be 3.7″ or bigger.
Tire pressure must be under 8 psi.
Do not ride on classic tracks.
Bikes yield to skiers.
Give skate skiers a wide berth.
Be an ambassador for the sport – stay polite, educate other bikers, discourage bad behavior, follow the rules, support grooming, and we’ll all have a good time this winter.
<>
Friends of Sleeping Bear Dunes On Facebook
Below are the latest postings from the Friends of Sleeping Bear Dunes Page On Facebook.
<>
This message is only visible to site admins
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.
Snowshoe Hike on the new Sleeping Bear Heritage Trail…
This message is only visible to site admins Problem displaying Facebook posts.
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.
Every spring at Boyne Mountain, we celebrate the new season with a party that brings together the festivities of St. Patrick’s Day and the zaniness of Mardi Gras – we affectionately call it Carnival Weekend.
Boyne Mountain – Carnival Weekend (2015) Photo Gallery – via Boyne Highlands Page on Facebook (Click on photos for captions & slideshow view)
<>
This message is only visible to site admins Problem displaying Facebook posts.
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.
How many gallons of water does it take to cover all the runs at The Homestead with machine-made snow? What’s the perfect combination of conditions for snowmaking? We caught up with The Homestead’s master snowmaker, Steve Sanborn, for these answers and more. Read on.
When most people think of Northern Michigan in winter, they naturally think of snow—deep, deep snow. So it may come as a surprise to learn that The Homestead has any snowmaking machines at all.
But the resort’s coastal location provides some unique challenges where snow is concerned. That’s why, years ago, The Homestead invested in top-of-the-line SMI snowmaking machines to take over when Mother Nature doesn’t exactly cooperate. Steve Sanborn is the man in charge of making those machines hum.
How has this year been on the snowmaking front? Have the snowmaking machines been quiet thanks to all the snow we’ve been having?
On the contrary, we have been quite busy. The resort’s grooming staff does an excellent job in presenting runs in a way that most skiers have no idea they are skiing over a golf course. Filling in the sand traps with snow, smoothing out the bunkers—contouring winter ski runs over land that is used as a golf course for the rest of the year requires a significant amount of snow.
How many snowmaking machines do you have? What are the ideal conditions for making snow?
We have five stationary tower guns and fourteen traditional snow guns—the barrel-shaped kind that we can move throughout the ski area. We also have twelve snow-sticks that are used for narrower runs. But none of it works without the right conditions. Basically, what you’re looking for are temperatures in the mid-teens, low humidity and minimal wind.
What are some of the unique challenges of making snow at a place like The Homestead?
Two major challenges being right next to Lake Michigan are the water and the wind. Water acts as an insulator at this time of year (until it freezes). Typically, air temperatures here at the resort are 5- to 10-degrees warmer than areas just a few more miles inland. As for the wind, the almost constantly blowing wind coming off Lake Michigan makes it difficult to keep snow on the North Face of the ski hill.
Where does the water for the snowmaking machines come from at The Homestead?
It takes approximately 12-million gallons of snow to cover all of our ski runs. We’re lucky to have a river flowing right through the property—the Crystal River, which is our primary water source. Wells at The Homestead also provide water. We take the water out, transform it into snow, and—when it all melts in the spring—the water goes right back where it came from.
What are some of the conservation measures The Homestead takes to making more efficient?
The SMI snowmaking machines we use at The Homestead are really topnotch. They’re all designed to maximize efficiency, specifically when it comes to conserving electricity used in the snowmaking process.
Any memorable tales from the snowmaking trenches?
Looking back over the years, one incident that remains most memorable is the time that our snowmaking team returned from the booster pump house on a routine operations check to find the snowmobile they road in on entirely engulfed in flames. The apparent cause was an electrical wire short, and the team brought things under control quickly; however, we were reminded that a seemingly “tame” job like snowmaking, definitely presents its own challenges to snowmakers.
<>
This message is only visible to site admins
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.
Below are the latest postings from the The Homestead Page On Facebook.
<>
This message is only visible to site admins
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.
PPCA Error: Due to Facebook API changes it is no longer possible to display a feed from a Facebook Page you are not an admin of. The Facebook feed below is not using a valid Access Token for this Facebook page and so has stopped updating.